| Model | VKS-SFL150W-Q | VKS-SFL200W-Q | VKS-SFL300W-Q | VKS-SFL400W-Q | VKS-SFL500W-Q | VKS-SFL600W-Q | VKS-SFL800W-Q | VKS-SFL1000W-Q |
| Input Power | 150W | 200W | 300W | 400W | 500W | 600W | 800W | 1000W |
| Product Size(mm) | 250x270x135mm | 250x270x135mm | 310x270x135mm | 310x270x135mm | 365x330x170mm | 365x330x170mm | 370x410x230mm | 440x410x230mm |
| Input Voltage | AC90-305V 50-60Hz | |||||||
| LED Type | CREE | |||||||
| Power Supply | Meanwell / SOSEN Driver | |||||||
| Efficacy(lm/W) | 150LM/W | |||||||
| Beam Angle | 10°/15°/30°/60° | |||||||
| CCT(K) | 3000K/4000K/5000K | |||||||
| CRI | Ra70/80 | |||||||
| IP Rate | IP65 | |||||||
| PF | >0.95 | |||||||
| Material | Die Casting Alumium | |||||||
| Operating Temperature | -30°C~60°C | |||||||
| Humidity | 10%~90% | |||||||
| Surface Finish | Powder Coating | |||||||
| Warranty | 5 yeras | |||||||
| QTY/Carton | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs |
| N.W.(KG) | 5.9 | 6.5 | 7.2 | 7.5 | 12.5 | 13 | 16.5 | 19 |
| G.W.(KG) | 7.2 | 7.8 | 8.5 | 8.8 | 14.5 | 15 | 17.5 | 20 |
| Package Size(cm) | 44x44x33 | 44x44x33 | 44x44x33 | 44x44x33 | 55x55x36 | 55x55x36 | 53x55x37 | 63x55x37 |
4-fold Heat Dissipation Process for High Heat Dissipation Efficiency This outdoor LED stadium floodlight features a multi-directional heat dissipation design to better promote heat export and improve the lamp's effectiveness and lifespan. *HTD process heat dissipation: The heat pipe fits directly to the heat source at zero distance, bringing the performance of the heat pipe to its fullest potential and greatly improving the heat conduction effect. *Thin fin set cooling design: The thin fin cooling process, with a large contact area with the air, increases the surface area of the cooling, effectively improving the performance, and the heat transfer speed exceeds that of aluminium by approximately 200 times, with excellent and safe and stable cooling effect.* Pure copper heat pipe cooling process: heat pipes use the principle of heat conduction and the fast heat transfer nature of the cooling medium. With the pure copper heat pipe riveted to the fins heat dissipation technology, the excellent thermal conductivity of the light source is conducted to the fins to achieve a rapid reduction in the temperature of the light source, while also protecting the lamp and extending the service life of the light source. *3D three-dimensional heat dissipation: each fin is distributed with parallel relative hollow small holes left and right through the convection air channel, using heat pipe riveted fin technology, combined with overclocked shell, inserted teeth innovative technology, various brand components, excellent heat performance, the heat generated by the light source through the heat pipe efficient transfer out, improve the service life of the lamps.
Double Protection: Waterproof and Dustproof High-strength tempered glass and silicone ring sealing process The heat dissipation kit as a whole is electrophoresis-treated, with strong corrosion resistance, passing 500 hours of aversion test, using high-strength tempered glass and silicone ring sealing process double protection lamps, waterproof grade to IP65, to meet a variety of outdoor harsh environment requirements, effectively prevent the intrusion of water droplets, dust, all-round protection of the lamps, and tempered glass light transmission rate of up to 96%, uniform luminous, light colour reproduction Realistic.
13 Bracket Adjustment Points For Free Adjustment The pitch light mounting brackets are made of thicker and wider aluminium alloy, which is wind resistant and corrosion resistant. There are 13 bracket adjustment points and the angle can be adjusted by 216°, so there is no dead angle of illumination.
The fins are made of special aluminium for aviation, the pure copper heat pipe is finned and pressed by the fin press process, the heat pipe fits closely to the fin technology. Highly tempered glass process with 93% light transmission.